Akzo Nobel Aerospace Coating - Home Page
Contact Akzo NobelContact Akzo Nobel
                  
About Akzo Nobel Aerospace Coatings Our Markets News and Publications Health and Safety Products Troubleshooting Frequently Asked Questions
Home > Troubleshooting > Equipment > Blistering

Troubleshooting

Application

Environment

Equipment

Mixing
Equipment Troubleshooting: Blistering

Cause
- Compressed air contained oil, grease and/or water
- Moisture in lines
- Trapped solvents

Prevention
- Always degrease before spraying
- Drain lines periodically
- Use proper thinner

Remedies
- Strip and clean or sand down and repaint

Equipment Troubleshooting: Blistering

 

Equipment Troubleshooting: Blistering


 
Other Options

Blistering

Overspray

Runs and sags

Fish eyes and cratering

Pinholes

Streaks

Flotation

Orange Peel

Poor adhesion

Excessive material loss

Sanding marks

Webmaster | | Legal Terms | Akzo Nobel Corporate Home

Copyright © Akzo Nobel Aerospace Coatings, 2005.